Watch Settings (Watch Set) - Polar CS100 Gebrauchsanleitung

5.5 WATCH SETTINGS (WATCH SET)

In the Watch SET menu, you can change the time of day and date settings.
1. In the Time mode, press the RIGHT button until SETTINGS is displayed.
2. Press the MIDDLE button. Cycling SET is displayed.
3. Press the RIGHT button until Watch SET is displayed.
4. Continue by pressing the MIDDLE button and follow the steps below:
The display reads:
5. Time
• Time Mode 24h/12h
• AM / PM
(if you use 12h format)
Press the RIGHT button to set the fl ashing value
RIGHT
• Set 24h or 12h time mode.
RIGHT
• Set AM or PM.
RIGHT
• Set the hours.
RIGHT
• Set the minutes.
Press the MIDDLE button to accept
the value
MIDDLE
MIDDLE
MIDDLE
MIDDLE
ENGLISH – 43