Selecting The Number Of Reduced Images To Be Captured In Memory - Sony UP-50 Gebrauchsanweisung

Making Variations of Printouts (Continued)

Selecting the number of reduced images to be captured in memory

36
Operation
The following two methods are available to select the memory mode:
• Using the MULTI PICTURE button
• Using the menu
To select the desired type of reduced images to be captured in
memory using the MULTI PICTURE button
1
Press the MULTI PICTURE button.
The following screen appears.
If you do not perform any operation after you press the MULTI PICTURE
button, the current setting appears for about 3 seconds, after which it
disappears.
MULTI PIX : 1 / 2 / 4 / 8 / 16
The currently selected type of reduced images
to be captured in memory is lit in green.
2
Select the type of reduced images to be captured in memory by pressing the
MULTI PICTURE button.
Press the MULTI PICTURE button repeatedly until the color of the type of
reduced images to be captured in memory turns green on the video monitor, or
until the type of reduced images to be captured in the memory is displayed on
the printer window display.
Each time you press the MULTI PICTURE button, the type of reduced-image
printout changes in order 1, 2, 4, 8, 16, 1....
Type Number of reduced images
1 1 (Full-size image)
2 2 (Two reduced images)
4 4 (Four reduced images)
8 8 (Eight reduced images)
16 16 (16 reduced images)
The screen is reset to the regular screen after a few seconds.
1,2
M U L T I P I X :
1 / – / – / – / – –
The currently selected type of reduced images
to be captured in memory is displayed.