Sony UP-50 Gebrauchsanweisung Seite 16

Before Printing (Continued)
Selecting the input signal on the menu
1
POWER
16
Operation
MEMORY SOURCE/ CAPTURE PRINT
PAGE MEMORY
ALARM PRINT
1
Turn on the video monitor and the printer.
2
Press the INPUT SETUP button.
The INPUT SETUP menu appears.
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
INPUT SEL : VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1
3
Select INPUT SEL by pressing the F or f button.
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
INPUT SEL : VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1
Position the cursor at INPUT SEL by
pressing the F or f button.
4
Select the desired input signal by pressing the G or g button.
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
INPUT SEL : VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1
Switch the desired input signal to green by
pressing the G or g button. The selected input
signal turns green and is spelled out.
5
Press the INPUT SETUP button.
The regular screen appears.
3
4
2,5
I NPUT S E T UP
S
I NPUT S E L
Press the F or f button until
S
INPUT SEL appears.
I NPUT S E L
Display the spelled-out input signal by pressing
S
the G or g button.
/ c / l / p / I N / o /
:
V I DEO / s v / r
:
V I DEO / s v / r