Sony UP-50 Gebrauchsanweisung Seite 87

2
Select LOAD COLOR by pressing the F or f button.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1
Position the cursor at LOAD COLOR
by pressing the F or f button.
3
Select the LOAD COLOR number of the values to be adjusted or to be
modified by pressing the G or g button.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1
Switch the desired LOAD COLOR number to
green by pressing the G or g button.
When modifying, you can preserve the original settings. (See "To retain the
originally set value" on page 91.)
TEMP
L OAD CO LOR :
Display LOAD COLOR by pressing the
S
F or f button.
TEMP
L OAD CO LOR :
Display the desired LOAD COLOR
S
number by pressing the G or g button.
Continue to the next page c
1 / – / –
– / 2 / –
Installation and Adjustment
87