Displaying The Quantity Of Images Printed - Sony UP-D50 Gebrauchsanweisung

4
Press the F and f buttons to select GRAY PRINT.
F f
Press and to display GRAY
PRINT.
G R A Y P R I N T
A D J 1 / a d j 2 [ E X E C ]
5
Confirm that ADJ1 is selected, then press the EXEC
button.
The gray adjustment pattern prints.
6
Look at the printout to determine the best gray
balance from pattern numbers 0 to 36.
If the optimum gray balance is not available, press
the G and g buttons to select ADJ2, then press the
EXEC button.
Look at the printout to determine the best gray
balance from pattern numbers 37 to 72.
7
Press the MENU button.
8
Press the F and f buttons to select GRAY ADJUST.
This returns you to the gray balance adjustment
mode.
F f
Press and to display GRAY
ADJUST.
G R A Y A D J U S T :
9
Press the G and g buttons to display the pattern
number determined in step 6.
For example, select 18 if you determine that pattern
number 18 in the sample provides the best gray
balance.
G R A Y A D J U S T :
10
Press the ONLINE button to return to the online
mode, or the MENU button to return leave the
printer in the offline mode.
The display returns to normal condition for the
relevant mode.
20 Adjustments
0
[ 0 - 7 2 ]
G g
Press and to display the desired
gray balance number.
1 8
[ 0 - 7 2 ]
Displaying the quantity of images
printed
The total number of images printed since turning on the
printer can be displayed. If no images have been printed
since the printer was turned on, the total number of
prints made so far is displayed.
2,5 3,4
1
Press the ONLINE button to switch the printer off-
line.
Press the ONLINE button and OFF
LINE appears.
O F F L I N E
2
Open the front door and press the MENU button.
3
Press the G and g buttons to select PRINT SETUP.
G g
Press and to display PRINT
SETUP.
P R I N T S E T U P
c o l / P R N / s y s
1