Setting The Remote Control; A) Selecting Model Memory - Reely 23 31 71 Bedienungsanleitung



12. Setting the Remote Control

Even if your remote control is factory preset for the model, you should check and/or correct and optimise
the steering responses of the model. Because only a model adjusted perfectly to the respective driver
offers maximum driving fun.
For this purpose, the remote control is provided with a programming menu which is easy to operate and
with the help of which all necessary settings on your model can be carried out.

a) Selecting model memory

Your remote control system has a total of 10 different model memories in which you can save the individual
setting values for 10 different models. Alternatively, you can also set different values for one model and save
each of them separately.
To select the model memory, proceed as follows:
• Switch the transmitter on. On the transmitter's LC dis-
play the operating display will appear.
• Now press the "SEL" menu button (see illustration 1, pos.
4) once.
On the top left on the display "MDL" appears and instead
of the operating voltage, the name of the model memory
is displayed with 3 letters and/or characters.
• With the two setting buttons (see illustration 1, pos. 6)
you can select one of the 10 memories (0..9).
• The selected model memory is automatically called when
turning on and remains active until you select a different
model memory in this menu.
Illustration 7
55