Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use - VOLTCRAFT B6 Duo Bedienungsanleitung

Multilader / entlader
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2. INTENDED USE

The "Multicharger-Discharger B6 Duo" is used to charge NiCd + NiMH type batteries
(1-18 cells), LiPo/LiIon/LiFe batteries (1-6 cells) and lead acid batteries (1-10 cells,
2 V - 20 V).
The charge current can be set between 0.1 A and 10 A depending on the connected
batteries and their cell number/capacity (see tables in chapter 24).
Batteries can also be discharged; the discharge current is between 0.1 A to 5.0 A (see
tables in chapter 24).
The charger may only be connected to a stabilised direct current voltage between 11 V/DC
and 18 V/DC.
A two-line illuminated LC display and several touch-sensitive keys are used to control the
charger.
There are two independent input channels available for charging/discharging. Each of the
charging channels has a connection for an external temperature sensor.
A balancer is integrated into the charger for LiPo/LiIon/LiFe batteries, with balancer
connector sockets for the battery located at the front of the charger.
Via a USB connection and the included software (PC with windows operating system
required, recommended as of Windows XP) the charging/discharging process can be
monitored.
A USB-A socket can be used to charge the respective USB devices (e.g. MP3-player, etc.)
The product is intended for use in dry indoor spaces, it must not get damp or wet!
Any use other than that described above will damage this product and involves the risk of
short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
Observe all safety instructions and information within this operating
manual.
58

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis