Flyer C SERIE Originalbetriebsanleitung Seite 169

Now pull the front part of the bike upwards and
to the height you prefer. (4). Notice the marking
showing how far you can pull it upwards. The
stem of the bike should not be pulled up further
than this marking! Close the quick release (5) so
that the handles stay in their position.
5
7. Open the quick release to the seat post (1)
and pull it out from the saddle tube and to your
desired height (2). Then correctly close the quick
release again(3) so that the saddle stays in its
position.
3
8. Now unfold the pedals to your FLYER Pluto.
Fold them outwards 90° (1). Pull the pedals care-
fully outwards (2) until they latch into their riding
position.
4
1
2
167
There are markings on the seat post
which show how far it can be pulled out
of the frame. Never pull the seat post be-
yond the maximum length marking.
2
Make sure that all of the quick releases
and fastening latches are correctly and
securely fastened.
Before riding, fold in the middle bike
stand again!
Before each ride, make sure there is
enough gripping force to the folding
hinge as shown in chapter 20.2. In addi-
tion, make sure that all the fuses are cor-
rectly closed. When riding, the folding
hinge must always be secured and nev-
er altered.
Have your FLYER retailer regularly
check the folding clasp. Do not turn the
adjusting screws on your own.
1
EN