Leica DIGILUX 2 Anleitung Seite 110

2.1.18 Shutter speed
(appears immediately with manual setting, i. e. with expo-
sure modes T/M, after tapping the shutter release button
with automatic setting, i. e. with exposure modes P/A, red
after pressing the shutter release button to the pressure
point when the setting range is exceeded with exposure
modes P/T/A, otherwise white)
2.1.19 Indication for setting the slowest shutter
speeds with the central setting dial
(only when setting the shutter speed dial to the
position )
2+
2.1.20 Aperture value
(appears immediately with manual setting, i.e. with expo-
sure modes A/M, after tapping the shutter release button
with automatic setting, i. e. with exposure modes P/T, red
after pressing the shutter release button to pressure point
when the setting range is exceeded with exposure modes
P/T/A, otherwise white)
2.1.21 Indication of program shift option
(appears only with exposure mode P)
2.1.22 Indication of shifted pair of values
(appears only with exposure mode P and after shifting)
108 / Displays
2.1.23 Exposure compensation set, including
compensation value
(not with exposure mode M and video recording)
alternatively to 2.1.18–2.1.23:
2.1.24 Time and date
(appears only briefly after turning on the camera and/or
after setting the data)
2.1.25 Light balance
(appears only with exposure mode M)
2.1.26 Automatic exposure bracketing activated
(crossed out and flashing in red when shutter release but-
ton is pressed to pressure point with flash unit attached,
or switched on and activated [function combination not
possible], otherwise white, not with video recording)
2.1.27 Exposure metering method
a 2 Center-weighted exposure metering
b 3 Multi-field metering
c 4 Spot metering
2.1.28 Synchronization to the end of the exposure
(not in conjunction with flash modes with
pre-flash 2.1.2 b/d/f)
2.1.29 Indication that spot exposure metering is
switched on
2.1.30 Spot autofocus metering field
(not with video recording)
2.1.31 Normal autofocus metering field
(not with video recording)
alternatively to 2.1.29–2.1.31:
2.1.32 A Self-timer switched on/running
(flashing in blue during delay, otherwise white)
a Ä
2 seconds delay
b Z 10 seconds delay
alternatively to 2.1.29–2.1.31:
2.1.33 y Sound recording in progress
(appears only during recording, microphone flashes in
blue, triangles alternate from black to red in a
1 s-rhythm)