Disassembling The Processing Tools - Gastroback 40969 DESIGN ADVANCED Bedienungsanleitung

Add ingredients sideways. For adding ingredients you do not need to remove splash
guard. For more information regard to ›Tips for usage‹.
CAUTION: Do not block the ventilation slits on the back of the
appliance and do not use the appliance in continuous operation
for more than 10 minutes to avoid overheating. If processing lar-
ge quantities of food, regularly interrupt operation and unplug the
appliance for a few minutes, to let the motor cool down.
As soon as the food has the right consistency turn the appliance
›Off‹ by turning the speed control anticlockwise into the ›Off‹-position (pic-
ture I). Pull the plug.
ATTENTION:
motor head is raised and never raise the motor head when the
appliance is in operational mode. Risk of injury! Always ensure
the appliance is switched ›Off‹ before raising or lowering the
motor head.
ATTENTION:
hair, clothing, as well as spatula and other utensils, away from
beater, whisk or dough hook during operation to prevent injury
and/or damage to the mixer.
ATTENTION: Keep hands and other utensils out of bowl while
blending food to reduce the risk of severe injury to persons or
damage to the unit. A scraper may be used but must be used only
when the unit is not running.
Take the splash guard off the bowl.
Push the head release lever with your right hand upwards (picture J). Grab hold of
the motor head in front of the processing tool with your left hand and rise the motor
head. Rise the motor head until locked into position.
Note:
Do not drop the motor head. The motor head is very heavy and
the pivoted joint would get damaged if the motor head falls
down with active force.

DISASSEMBLING THE PROCESSING TOOLS

Push the attachment of the processing tool upward until it is relea-
sed of the indent (picture K). Turn the processing tool clockwise
until the guiding pin of the motor head fits through the cannelure
of the processing tool (picture L/M).
You can release the processing tool now by pulling it downward.
Never switch ›On‹ the appliance when the
Avoid contact the moving parts. Keep hands,
45
G
locked
release
H
lock
I
released
J
locked