Philips HomeRun 9000 Serie Bedienungsanleitung Seite 16

English
16
Start your first cleaning session via the app
Using the robot without the app
Start
1 Open the app.
2 Select the cleaning area: 'Regular', 'Room', or 'Zone'.
3 Press the 'start' icon.
Note: make sure that the on/off switch on the bottom of the robot is set to
the "on" position ("I").
Note: If the battery level is too low, cleaning cannot start. Wait until the robot
is sufficiently charged before you start a cleaning session.
Stop
1 Press the Pause icon in the app. The robot stops.
2 Press the Start icon again. The robot continues.
3 Press the Return icon. The robot goes back to the station.
Note: For an optimal experience, we recommend using the app.
Without the app, you can use the two buttons on the robot to operate it:
-
Start/stop button
-
Long press (3s) to turn the robot on and off.
-
Short press to start cleaning or to pause cleaning. Press again to resume
cleaning.
Note: When you start a cleaning task by pressing the start/stop button on the
robot, the robot runs in the 'Vac & Mop' mode by default.
-
Return button
-
Short press (when the robot is not cleaning): the robot will find the station
and charge.
-
Short press while cleaning: the robot will stop cleaning. Short press again:
the robot returns to the station to charge.
-
Short press when the robot is driving back to the station: the robot will
pause returning to the station. Press again to let it drive back to the
station.
Note: To deactivate the robot's Wi-Fi function, press the bumper on the front
side of the robot and the start/stop button on the robot for 10 seconds. You can
still use basic functions without Wi-Fi, but for full access to all features, we highly
recommend pairing the robot with Wi-Fi.