Whirlpool SMP 778 C/NE/IXL Bedienungsanleitung Seite 5

Owner's manual
The rate of cooking can be adjusted at any time using the "+" and "–" buttons
on the right-hand display.
BOILING*
To e ciently heat water and alert the user when it begins to boil, via an audible
and visual signal.
While awaiting con rmation from the user, the system keeps the water at a
controlled simmer, preventing spills and wasted energy. Whilst this function
is active, an audible alarm warns the user if the pot is empty (no water) or if it
has boiled dry.
Only add salt after the boiling alert has sounded.
PAN FRYING*
To preheat or season an empty pot or pan. An audible and visual signal
indicates that the ideal temperature has been reached for food to be added
to the pot or pan. While awaiting con rmation from the user, the system
keeps the accessory at a controlled heat, preventing the pan from reaching
damaging temperatures and avoiding energy wastage.
For optimum conditions, use this function with pots and seasoning at room
temperature.
Dedicated accessories must be used for this function.
Do not use the lid - to protect against splashes, a splash guard is recommended.
It is advisable to use oils that are suitable for frying when cooking with this
function, such as seed oils of various types. When using di erent oils, always
take extra care to supervise cooking during rst use.
GRILLING*
This function allows for optimum grilling of a range of foods, according to their
thickness. When the ideal temperature has been reached for food to be added,
the hob beeps. The hob then stabilises the temperature throughout cooking,
keeping it constant. Once the user has con rmed that food has been added,
cooking begins.
It is advisable to prepare the food during the heating stage, adding it as soon
as you hear the beep.
For optimum conditions, use this function with pots and seasoning at room
temperature.
If you are not using the wire rack designed for this purpose, take extra care
when rst using the grill function, as the quality of the base may a ect heating
times. Accessories with very thin bases can reach very high temperatures in a
short time.
MOKA*
This function allows "moka" stove-top co ee makers to be heated automatically.
The heating cycle can be activated by selecting the function in the menu, and
a beep will sound when the co ee is ready. The function is programmed to
switch o automatically, preventing spills. When using for the rst time, always
check that the conditions described are met. For optimum conditions, use this
function with the co ee maker and water at room temperature.
* For these functions, the use of dedicated accessories is recommended:
for boiling: WMF SKU: 07.7524.6380
•
• for pan frying: WMF SKU: 05.7528.4021
• for grilling: WMF SKU: 05.7650.4291
• for Moka, Bialetti: MOKA INDUZIONE 3TZ ANTRACITE
Please note: Try not to move the pot or pan during the rst minute of heating, in
order to allow the hob to function optimally.
CHEF CONTROL
This function divides the hob into four cooking zones, activating these
simultaneously at a pre-set power level. It allows you to move pots from one
area to another, to allow you to continue cooking at di erent temperatures.
To activate the Chef Control function:
1. Place the pot in position.
2.
Press the 6 Sense button.
th
3.
Select "Chef Control" from the manage functions display and con rm.
6TH SENSE MENU
Chef Control
4. The four cooking zone panes appear on the left-hand display, with the
corresponding power level (low, medium, high).
5.
If you wish to add more pots, use the "Add pot" command
6.
To exit this function, press "STOP".
CHEF CONTROL
Place a pot
To change the power of a cooking zone:
1. Select cooking zone.
2.
Select the desired power level by dragging your nger across the slide
touchscreen, which will remain visible for 1 second.
3.
The word corresponding to the power level selected (low, medium,
high) reappears.
Please note: The changed settings are saved until you change them again or reset
them.
FLEXIFULL
This function allows you to use the entire hob as a single cooking area.
To activate the Flexifull function:
1. Place the pot in position.
2. Press the 6 Sense button.
th
3. Select "Flexifull" from the manage functions display and con rm.
6TH SENSE MENU
Flexifull
4.
Set the desired power level from the slide touchscreen. The power level set
appears on the left-hand display.
5. If you wish to add more pots, use the "Add pot" command
6. To exit this function, press "STOP".
FLEXIFULL
Place a pot
OK
.
OK
.
EN