hillvert HT-MD-300A Bedienungsanleitung Seite 137

EN
A – Jam Nut
B – Adjustment Nut
C – Lock Nut
If the above adjustment does not create enough cable tension, follow the steps below:
1. Loosen the jam nut by turning it counter clockwise with 12mm wrench.
2. Tighten or loosen the cable by turning the cable adjustment nut clockwise or counter clockwise with
10mm wrench until you have reached your required tightness.
3. Once tightness is set, return the jam nut against the handle to hold the cable in place.