Quick Guide - APRILIA eSR2 Benutzerhandbuch

• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms,
or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case,
restore pressure as indicated.
• Check and adjust the brakes.
• Turn on the display.
• Place the product on a flat surface.
• Hold the handlebar firmly with both hands. Step onto the footrest with one foot and use the other to give yourself a gentle
push and accelerate.
CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the item, tilt body in the riding direction during a turn and slowly turn the handlebars.
• To stop the item, release the accelerator, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear,
accelerator and charge status of battery.
Brake lever position
eSR2 / eSR2 EVO / Tuareg
It is possible to adjust the position of the brake lever, if
necessary, by unscrewing the screw (A). Once the position
has been adjusted, tighten the screw (A).
6.

Quick guide

eSRZ / eSRZ Safe Ride (opposite side)
The brake lever can be adjusted when needed by unscrewing
the screw located underneath (A).
Once the position has been adjusted, tighten the screw (A).
15