Intended Use
The pneumatic rotary hammer is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also suitable for drilling
without impact in wood, metal, ceramic and plastic.
Before first Use
Unpack the pneumatic rotary hammer and check all parts for any damage in
transit. Dispose of packaging materials or store it out of reach of children.
Plastic bags etc. may become a deadly toy for children.
Attention! Unplug from the power supply before cleaning, maintaining or when
not in use.
Use only tool bits with SDS-plus coupler! If the shank of the tool does not
match the coupler on the machine, the tool cannot and must not be used!
Inserting Tools
1. Lightly lubricate the shaft of the drill before inserting. Keep the guides and
grooves in the shaft clean.
2. To attach a drill or chisel, pull the SDS-plus chuck (8) back and insert the
tool into the chuck.
Engage the slot of the tool with the guide rail in the chuck.
3. Slightly turn the tool while inserting until the grooves and guides lock into
each other. When the locking ring slides back into place, the tool is locked
into place. Before starting to work, check if the tool is firmly locked into
place.
4. To remove the tool, pull back the locking ring and pull the tool out of the
chuck.
Operation
9