Operating; Before First Use; Assembling And Using The Water Kettle - Westfalia 85 57 33 Bedienungsanleitung

Before first Use

 Remove the electric kettle from the packaging and check it for
any damage in transit.
 Dispose of any non-reusable packaging material properly or store
it in a safe location out of reach of children.
 Clean all parts of the electric kettle before using the first time as
described below (chapter "Cleaning and Storing").

Assembling and using the Water Kettle

1. Place the base (3) on a solid, level surface.
2. Only connect the base to a properly installed, earthed mains
socket with protective connection.
3. Fill the electric kettle with water. Do not overfill. Do not exceed
the MAX mark on the water level indicator (6) of the kettle.
4. Place the electric kettle on the base (3) and closed the lid (7) by
pressing it down.
5. Press down the switch (5) in direction 1, to switch on the electric
kettle. The power indicator (4) LED turns on. Make sure the lid (7)
is closed during operation.
Before using the electric kettle for the first time, fresh water
should be boiled in it twice for cleaning. Do not use any additives
or detergents.
After boiling, the device automatically switches off. If you want to
stop the boiling process, lift up the switch (5) or just remove the
kettle from the base. Attention hot water! There is risk of injury!
6. Disconnect the base from mains power if you do not use the
water kettle for a longer period of time, when cleaning or moving
it or if any malfunctions occur.

Operating

12