Keep-Warm Button; Temperature Selection Button - Westfalia 86 02 76 Bedienungsanleitung

If you want to stop the boiling process, press the ON/OFF button
(5) again or just remove the kettle from the base.
Attention hot water! There is risk of injury!
Always disconnect the base from mains power if you do not use
the water kettle for a longer period of time, when cleaning or
moving it or if any malfunctions occur.

Keep-warm Button

1. Push the keep-warm button (3) several times in order to select
the desired temperature from 60, 70, 80 or 95° C.
2. Press the ON/OFF button (5), to heat up the water to the desired
temperature. Please note that the water will always be heated up
to 100° C. Afterwards the device switches off and a flashing dot
on the display shows that the keep-warm function is activated.
When the water cooled down, the water kettle switches on again
to heat up the water to the desired temperature. You will hear a
signal sound to make sure that the water is heated up again. The
temperature of the water will be kept for approx. one hour.
Afterwards the device will switch off the keep-warm function.

Temperature Selection Button

1. Push the temperature selection button (4) several times in order
to select the pre-selected temperatures 60, 70, 80, 95° C.
2. Press the ON/OFF button (5) in order to heat up the water to the
desired temperature.
After reaching the selected temperature you will hear several
signal sounds and the device will switch off.
Operation
17