Miele PDR 914 SOM Gebrauchs- Und Aufstellanweisung Seite 96

en - Installation
96
After the machine has been aligned, screw the nuts on the ad-

justable feet tightly to the base plate using an open spanner.
Installing the machine on ships
On other types of floor structures (in cases where the machine is be-
ing installed on sea-going vessels, for example), the fixing materials
must be provided on site.
For installation on sea-going vessels, the machine must be secured to
prevent slipping and tipping by fastening it to the floor of the vessel
(e.g. using clamps that are welded to the floor of the vessel).
All 4 of the machine's feet must be secured.

Electrical connection
The electrical connection must be established by a qualified electri-
cian.
The electrical connection may only be made to an electrical system

provided in accordance with all appropriate local and national legisla-
tion, regulations and guidelines. Please also observe the regulations
set out by your insurance provider and energy supplier, accident pre-
vention regulations, as well as recognised codes of practice.
Reliable and safe operation of this tumble dryer is only ensured if it

has been connected to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be
found on the data plate on the tumble dryer. Ensure that the supply
voltage matches the voltage quoted on the data plate before estab-
lishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the
data plate can damage the tumble dryer if the voltage is too high.