Miele PDR 914 SOM Gebrauchs- Und Aufstellanweisung Seite 84

en - Supervisor level
- Factory default: Off
- On
Moving programmes/favourites
You can move/change the order of the programmes (programme menu – single option list).
You can also move and change the order of the favourites that you edit in the Supervisor
level under Favourite programmes.
Touch the programme that you wish to move.

Press and hold the sensor until the frame changes.

Drag the programme to the required place.

Prog. colour allocation
You can assign a specific colour to a favourite programme. In the list of favourites, each fa-
vourite programme is given a coloured frame, which can be adjusted.
- Factory default: Off
- On
Process technology
Anti-crease
At the end of the programme, the drum will continue to rotate at intervals if the laundry is
not removed immediately.
Changing this setting leads to increased energy consumption.
The setting for Anti-crease  can either be switched off or a time between 1 and 12 hours
can be selected.
Factory default: 2 hours
Drying levels
Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
grammes.
Drying levels
Cottons
levels.
Factory default: normal
Further cooling
If extended cooling is activated, the drum temperature is checked approx. 1 minute before
the machine goes into standby mode at the end of the programme. If the temperature is
above 55 °C, the dryer will carry out cooling until it is below 55 °C.
Changing this setting leads to increased energy consumption.
- Factory default: off
- On
84
Cottons
, and
Minimum iron Automatic plus
, and
Minimum iron Automatic plus
can be set to one of 7 different
pro-