Werbung
1) UNIT/REAR AMP REMOVAL
@ Push the claw of *& mark, then remove the Unit from Front bracket.
® Take out the three screws then remove the Rear Amp from Front bracket.
@ Take out the Twelve screws then rernove the Rear Amp PCB from Heat Sink. (Fig.1)
XTB3 + 8FXS x3
&D
YEJSOSO01 x2
oe
XTB3 + 5FXS
x
\
og
"¥
YEJSO500
YEJSOS006 x 2
E-2030A
2
1x*2
2) ESCUTCHEON REMOVAL
3) DECK REMOVAL
© Take out the two screws, then remove
the
@ Pull out the CN201(J) and the CN251(J) .
handle ass'y from chassis.
® Take out the four screws.
@ Pull out the each knobs.
® Deck ass'y can be removed
by passing
it
® Remove the escutcheon by pusing two claws
through the gap in the Front Plate.
on both sides of the escutcheon.
Upper
Cover
YEJTO3015
MAIN PCB
E-6213Ba
(PL702)
— 33 —
Werbung
