Explanation Of Signs; Explanation Of Symbols; Safety Instructions And Hazard Warnings - Conrad Mc Crypt MCB-1002 Bedienungsanleitung

Explanation of signs

A triangle containing a lightning symbol indicates a health hazard e.g.
electric shock.
The exclamation mark in a triangle indicates to you particular risks in
handling, operating and control.
The hand symbol indicates useful tips and additional comments about
use.

Safety Instructions and Hazard Warnings

The guarantee is rendered invalid when damage is incurred as a
result of non-compliance with the operating instructions! We shall
not assume any liability for consequential damage !
We do accept any liability for personal injury or damage to property
caused by incorrect handling or non-observance of the safety
instructions! In such cases the guarantee will lapse.
For safety and licensing reasons (CE), unauthorised conversion and/or
modification of the appliance is not permitted.
The product may not be exposed to extreme temperatures (<+10°C /
>+40°C).
The appliance should not be exposed to strong vibration or heavy
mechanical stress.
The appliance should not be exposed to excessive dampness such as,
from dripping or sprayed water.
The appliance is constructed according to protection class II.
This product has been designed for operation in a dry interior.
34
Troubleshooting
By purchasing this mixing desk you have acquired a product that has been designed
according to state of the art technology and that is operationally reliable.
Problems and malfunctions may, however arise.
We would therefore like to describe how you can repair certain malfunctions yourself.
Always adhere carefully to the safety instructions!
Problem Possible cause
Appliance not func- The mains adaptor plug is not
tioning even after correctly plugged into mains
having switched socket / the low voltage plug
the on/off switch has not been correctly plugged
on the rear of into the mixing desk
the mixing desk The AC/BATT switch indicates
to the on position battery operation
The power display
does not light up
The on/off switch The appliance is on battery
on the rear of power and the AC/BATT switch
the mixing desk is pressed down (is on battery
does not function power).In this the AC/
BATT switch serves as
an oN/OFF switch
The power display No input signal available
lights up, but you The input level is on
can hear no wrong setting
sound
The "MAIN" control is turned
right down
The channel fader is turned
right down
No signal can be The additionally connected
heard even appliance
though the levels (amplifier) has not
display a signal switched on or is set
incorrectly
The output is not connected
or incorrectly connected
Elimination of the fault
Mains adaptor plug and low-
volt plug should be correctly
plugged in
The AC/BATT switch
should not be pressed
during mains operation
Use AC/BATT switch as
on/off switch
Check source of signal
The input level of each
channel should be correctly
set.
Set the "MAIN" control to
correct setting
Set the channel fader to
the correct setting.
Check the additio-
nally connected
appliance, select
correct input on amplifier
dialing
Connect the output
as instructed
55