Column Mounting; Installing Cables And Connectors - Mettler Toledo IND500x Installationsanleitung

2.3.3 Column Mounting

A positionable bracket kit (# 22020286) that features VESA 100mm × 100mm hole spacing is optional for
column mounting.
1 Align the four VESA holes (1) in IND500x with holes (3) in the positionable bracket.
Figure 9: Column Mounting
2 Attach the terminal to the bracket with four M4 screws (4) and four PA6 washers (2).
The terminal is installed onto the bracket.
Adapter Kit
The IND560x is installed on the bracket (# 22015188) with 120mm x 78mm hole spacing. For customers
who need to replace the existing IND560x with IND500x terminal and keep the existing bracket, an adapter kit
(# 30353299) must be used to adapt the VESA 100mm × 100mm hole spacing in IND500x.
1 Align the four VESA holes in IND500x with holes (5) in the adapter kit (6).
Figure 10: Column Mounting with Adapter
2 Attach the terminal to the adapter kit (6) with four M4 screws.
The adapter kit is attached to the terminal.
3 Attach the four studs (7) in the adapter kit (6) into holes (8) in the bracket (10).
4 Attach the terminal to the bracket (10) with four M5 nuts (9).
The terminal is installed onto the bracket with an adapter kit.

2.4 Installing Cables and Connectors

Information for installing cables and connections to the terminal is provided in this section, including:
Ferrite
IND500x
1
5
6
7
8
9
10
2
3
4
Installation​ ​ 17