Clear Totals; Memory Tables; Log Files; Change Log - Mettler Toledo IND500x Installationsanleitung

If an invalid ID number is entered, an "ID Not Found" message displays.
A Target record is selected by quick access.

3.4.4.3 Clear Totals

All the records in the Target Table can be cleared by pressing the CLEAR softkey
the table at Application>Memory>Target Table.
Figure 68: Target table-mode-OverUnder
The totals for all of the records in the Target Table are cleared by pressing the REPORT softkey
Page, selecting Target Table from the selection box, and pressing the CLEAR TABLE TOTAL softkey
Clear the Total Value of An Individual Record
1 Access the menu tree and move to Application>Memory>Target Table.
2 Press the VIEW TABLE softkey
3 Press the FILTER OFF softkey
4 In the Filter Settings page, use the Search Field selection boxes and associated data fields to enter specific
search information to limit the search, or use the default "find all" character, the asterisk (*), to view all
records.
5 Press the OK softkey
6 Use the UP and DOWN navigation keys to highlight the target record for which the total is to be cleared and
press the EDIT softkey
7 Press the DOWN navigation key to highlight the "n" and "Total" label and press ENTER.
8 Clear the "n" and/or "Total" values by pressing the CLEAR key on the numeric keypad when focus is in that
data entry box. When the value in the data entry box is clear, press ENTER.
9 Press the OK softkey
10 Press the EXIT softkey

3.4.5 Memory Tables

3.4.6 Log Files

3.4.6.1 Change Log

The Change Log in the IND500x terminal file tracks all changes to shared data. The Change Log can be
enabled or disabled in setup at Maintenance>Configure/View>Change Log.
The Change Log file is a linear-type file that eventually becomes full if not reset. It will hold an estimated 2,500
records. When the file becomes 75% full, a warning message displays to indicate the status. Another message
displays when the file is 90% full. If the file is not reset, it will continue to store records until it is 100% full and
a final 100% full message displays. Additional changes to shared data will not be recorded until the file is
reset.
The Change Log file is available as a comma-delimited file (change.csv) that can be exported to the InSite
program or any FTP client PC.
User could view change log on terminal or Web Server. The example of view show as below.
Date
12-Jul-2021
12-Jul-2021
IND500x
. The Target Table page shows.
.
. The Target Table screen displays with the search results sorted by ID.
. The Target Edit screen displays.
to accept the changes.
four times to return to the home screen.
Time User
15:30:05 Admin
15:29:45 Admin
in the first setup page for
Object New Value
dc0101 1
dc0102 2
in Home
.
Appendix​ ​ 83