Each telephone number can have a maximum length of 16 digits.
During programming, the
symbols:
-
-
-
•
Contact type
There are two possibilities when selecting the contact type:
-
-
IMPORTANT:
When entering the telephone number, be aware of local or international dialling
codes regarding the transfer path (analogue or GSM)!
8.3.1.2 Setting the contact details
10. Enter your user code. The initial contact details menu point is then
displayed.
Press
11. Scroll through the menu options using the
press the corresponding contact number
* (star): Adds a * to the number.
# (hash): Adds a # to the number.
, (comma): When the GSM dialer is connected to a
telephone system, then a dial pause must normally be added
in order to call external numbers. Adding a comma gives a
dial pause of three seconds (e.g. (0), 0160/12345678)
Voice only
The GSM dialer dials the contact number, plays general and
specific messages and repeats these four times in total.
Text only
The GSM dialer dials the contact number and forwards the
message to the relevant number.
to select. Contact 01 is displayed.
key can be used to enter the following
↑↓ ENT to select
Contact Details
Contact 01
Name 01
69
keys, or alternatively
-
.