Transport, Storage And Handling - Corghi EM9980 TouchlessLine Betriebsanleitung

TRANSPORT,
STORAGE AND HANDLING
The basic wheel balancer packaging consists of
1 wooden crate containing:
- Wheel balancer.
- Monitor (in packaging).
- Wheel guard.
- Equipment.
Before installation, the wheel balancer must be
shipped in its original packaging, making sure
that the machine is maintained in the position
indicated on the outer packaging. The machine
can be moved by placing the packaging on a
wheeled trolley or inserting the forks of a fork
lift truck in the relative slots in the pallet (Fig. 1).
- Packaging dimensions:
Length (mm/in): ........................................ 1786/70
Depth (mm/in): ......................................... 1148/45
Height (mm/in):.. ..................................... 1250/49
Weight (kg/lb):.. ....................................... 226/497
Packaging weight (kg/lb): ............................ 43/95
Weight of electrical/electronic
components (kg/lb):. ................................... 10/22
- The machine must be stored in an
environment meeting
requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
CAUTION
Do not stack more than two packs to avoid
damaging them.
EM9980 TouchlessLine - Operator's manual
The machine may be moved for installation or
for subsequent relocation as follows:
- With a crane, using special equipment that
- By inserting the forks of a lift truck under the
1
the following
Always unplug the power supply cable from the
socket before moving the machine.
holds the machine at the designated lifting
points (Fig. 2).
machine so that the centre of the forks corre-
spond approximately to the centre line of the
body (Fig. 3).
WARNING
2
UK
3
43