I) Setting The Tilt Movement For Bar 2; J) Display Deactivation; K) Setting The Display Alignment; L) Self-Test Function - Renkforce Mini Spider Bedienungsanleitung

i) Setting the TILT movement for bar 2

• Use the MENU (1) button to select tIn2 in the menu and push the ENTER (4) button.
• Select the desired direction of the TILT movement for bar 2 with the UP (3) and DOWN (2) buttons.
no TILT-movement not inverted
YeS TILT-movement inverted
• Press the ENTER button (4) to confirm your selection.

j) Display Deactivation

• Use the MENU (1) button to select Led in the menu and push the ENTER (4) button.
• Select the desired function with the UP (3) and DOWN (2) buttons.
oFF The display switches off after approx. two minutes after the last button is pushed.
When the button is pushed again, the display will be activated again.
on Display permanently on
• Press the ENTER button (4) to confirm your selection.

k) Setting the Display Alignment

• Use the MENU (1) button to select dISP in the menu and use the ENTER (4) button to select the desired display
alignment:
dISP normal display alignment
dSIP inverted display alignment
If you want to operate the device suspended, the display alignment should be inverted.

l) Self-test Function

• Use the MENU (1) button to select teSt in the menu and push the ENTER (4) button.
• The device performs a self-test.
The display teSt flashes during the self-test.
m) Performing a Reset
• Use the MENU (1) button to select rSet in the menu and push the ENTER (4) button.
• The device performs a reset and then returns to normal operating mode.
The display rSet flashes during reset.
37