H) Setting The Display Alignment; I) Setting The Pan-Movement; J) Setting The Tilt-Movement; K) Self-Test Function - Renkforce SC-12 Bedienungsanleitung

h) Setting the Display Alignment

• Use the MENU (4) button to select dISP in the menu and push the ENTER (7) button.
• Select the desired display alignment with the UP (6) and DOWN (5) buttons.
dISP normal display alignment
dSIP inverted display alignment
• Press the ENTER button (7) to confirm your selection.
If you want to operate the device suspended, the display alignment should be inverted.

i) Setting the PAN-movement

• Use the MENU (4) button to select PAn in the menu and push the ENTER (7) button.
• Select the desired direction of the PAN movement with the UP (6) and DOWN (5) buttons.
YeS PAN-movement inverted
no PAN-movement not inverted
• Press the ENTER button (7) to confirm your selection.

j) Setting the TILT-movement

• Use the MENU (4) button to select tILt in the menu and push the ENTER (7) button.
• Select the desired direction of the TILT movement with the UP (6) and DOWN (5) buttons.
YeS TILT-movement inverted
no TILT-movement not inverted
• Press the ENTER button (7) to confirm your selection.

k) Self-test function

• Use the MENU (4) button to select teSt in the menu and push the ENTER (7) button.
• The device performs a self-test and then returns to normal operating mode.

l) Display of the operating hours

• Use the MENU (4) button to select FhrS in the menu and push the ENTER (7) button.
• The display (3) shows the number of operating hours that the device has completed already.

m) Display of the software version

• Use the MENU (4) button to select ver in the menu and push the ENTER (7) button.
• The display (3) shows the software version of the device.
37