Inhaltsverzeichnis
Werbung
LIGHTING SYSTEM
INSPECTION STEPS
Refer to the following flow chart when inspecting the ignition system for possible problems.
Check the bulb and bulb
socket.
OK
Check the light switch.
OK
Check the CDI magneto.
OK
Check the entire lighting sys-
tem proper for connections.
OK
Check the voltage regula-
tor.
NOTE:
Replace the bulb and/or bulb socket.
1) Seat
2) Fuel tank
Use the following special tool.
Pocket tester:
YU-3112-C/90890-03112
LIGHTING SYSTEM
No good
No good
No good
Lighting coil
Improperly connected
No good
Out-put volt-
age
6 - 11
ELEC
Replace the bulb and/
or bulb socket.
Replace.
Replace.
Repair or replace.
Replace.
Inductive tachometer:
YU-08036-B
Engine tachometer:
90890-03113
–
+
Werbung
Inhaltsverzeichnis
