Inhaltsverzeichnis
Werbung
Ò Pass the carburetor breather
hose
and
overflow
between the connecting rod
and cross tube (frame).
˜ Pass
the
cylinder
breather hose through the hose
guide.
ˆ Pass the clutch cable through
the cable guide.
Ø Fasten the neutral switch lead
and CDI magneto lead.
∏ Pass the clutch cable along the
inner side of the cylinder head
breather hose.
ΠPass
the
cylinder
breather hose along the inner
side of the radiator hose.
CABLE ROUTING DIAGRAM
 Pass the clutch cable in front of
hose
the radiator mounting boss.
Í Fit the brake hose into the
guides on the protector.
Ê Fasten
head
the
together with the ignition coil
lead.
Ë Do not allow the engine stop
switch leads and light switch
lead to slacken between the
two clamps.
◊ Pass the decompression cable
along the right side of the cylin-
der head breather hose.
„
head
Pass the clutch cable through
the cable guides.
2 - 20
Ù
Pass the carburetor breather
hoses and overflow hose so
that all there hoses do not con-
tact the rear shock absorber.
Á
ground
lead
Position each lead at the lower
left of the main tube (frame).
SPEC
Werbung
Inhaltsverzeichnis
