Parker O-Ring Measuring Cone And Measuring Tape; Parker O-Ring Assembly Aids - Parker O-Ring Handbuch

13. Other products
13.4 Parker O-Ring measuring cone and
measuring tape
The measuring cone can be used for quick and accurate defini-
tion of 2-xxx O-ring sizes up to 75 mm diameter. The reference
diameter of the cross section is easily noted using the calibrated
slot in the cone base.
Cone, e.g. cross-section 2.62 mm is the 2-1xx series.
The 2-1xx series is read from the cone directly above the calibra-
tion slot for the 2.62 mm section. The respective inner diameter
in millimetres then can be taken from the size list.
The measuring tape suits O-ring diameters up to 200 mm and is
used in a similar way like the cone. The different scales on the
tape apply to diverse cross-sections.

13.5 Parker O-ring assembly aids

These tools make O-ring assembly and removal much easier in
avoiding damage. The kit including two pieces is delivered com-
plete in a plastic wallet.
Checking the cross-section
Identification of the 2-xxx size number with the measuring cone
Identification of the O-ring size using the measuring band
201
O-Ring Handbook
Parker Hannifin GmbH
O-Ring Division Europe