Other Products; Rubber Molded Parts; Lubrication Of O-Rings During Assembly- O-Lube And Super-O-Lube - Parker O-Ring Handbuch

13. Other products

13. Other products

13.1 Rubber molded parts

Our experience
As a manufacturer of precision seals we have many years of
experience
 with the development of elastomeric compound
 with moulding of rubber to highest tolerances
 as technical consultants
We therefore have the ability to work to complex customer-spe-
cific requirements. At this time our customers for these products
come from many branches of industry like Automobile, electron-
ics, measurement and control, aircraft, pneumatic, food and
drug, just to mention but a few.
Our offer of assistance helps customers to reduce their costs
from the planning stage to bulk production of moulded shapes. In
matters of design, our application engineers cooperate with you
to reduce production costs and review your problem in the light
of their experience.
Wide range of compounds
When a design is finalized the working lifetimes of such moulded
shapes are decided upon the type of elastomer being selected.
This decision can be taken only after detailed consultation where
the application and all external influences which may affect the
physical-chemical properties of an elastomer have been consid-
ered. The wide range of elastomers in the Parker line ensures
optimum suitability for a given application because we know the
advantages and limits of our elastomers.
Therefore we are in a position to offer you an optimum solution.
Processing to tight tolerances
Moulds are manufactured to the tightest tolerances in our own
tool room to the knowledge based on years of experience. The
selection of the production process therefore can be based on
technical and economic factors allowing for greater flexibility and
efficiency.
Quality
Quality assurance begins with research and development and
ends with packing and dispatch inspection. Parker has built sev-
en important quality control stations in its system to guarantee
quality, namely:
1. goods inward inspection of raw materials
2. mixture inspection and testing (batch no. system)
3. monitoring of production plant
4. patrol inspection of production (checks of temperature, pres-
sure, production tooling)
5. 100 % visual inspection of product
6. statistical final inspection
7. inspection of packaging and dispatch documents
Only when a product passes the above inspection procedures
can the Parker quality be attained.
191
O-Ring Handbook
Parker Hannifin GmbH
O-Ring Division Europe