Stiga 9L3BL Bedienungsanleitung Seite 62

Prolonged inactivity and restarting, 45
Purpose of the manual, 5
R
Recommendations for parts replacement, 55
Requesting technical assistance, 6
Robot cleaning, 48
Robot disposal, 56
Robot safety stop, 40
Robot start-up without the perimeter wire, 43
EN
Routine maintenance table, 47
S
Safety devices, 13
Safety for man and the environment during disposal, 13
Safety information, 11
Safety – programming mode, 38
Safety regulations, 11
Safety signals, 14
Secondary Areas – programming mode, 37
Settings – programming mode, 34
Shedules – method, 35
T
Technical specifi cations, 9
Troubleshooting, 49
U
Use of the robot in closed areas with no charging station, 41
V
Visualisation of the display during the work phase, 44
w
Work mode – programming mode, 3
Reproduction, even partial, of this document without the written authorisation of the manufacturer is strictly forbidden. The manufacturer implements
a policy of continual improvement and reserves the right to modify this document without prior notice on condition that the modifi cations do not
constitute a health and safety risk.
© 2008 – Text, illustrations and page layout by Tipolito La Zecca. The text can be reproduced, in whole or in part, on condition that the author is
mentioned.
User's manual 4