Pin Assignment - Balluff BOS R254K-UUI-RE10-S4 Konfiguration

BOS R254K-UUI-RE10-S4
Photoelectric Sensors
6
System Functions (continued)
6.5

Pin Assignment

6.5.1 Description
Two different internal digital and analog signals are
available that can be output or read in at the pins of the
device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
– Analog Output
6.5.2 ISDU
Name Index
Pin 4 Function 0x0090
(144)
Behavior IO-Link
Mode
Pin 4 Digital 0x0091
Configuration (145)
1)
Signal Source
Logic
Type
Pin 2 Function 0x0093
(147)
Behavior IO-Link
Mode
Pin 2 Digital 0x0094
Configuration (148)
1)
Signal Source
Logic
Type
Pin 2 Analog 0x0095
Configuration (149)
2)
Signal Source
Characteristic
Type
The settings in the digital configuration are only used if the pin was configured as a digital output or digital input.
1)
The settings in the analog configuration are only used if the pin was configured as an analog output.
2)
Tab. 6-11: Pin assignment – ISDU
www.balluff.com
Sub- Access Length
index
0 R/W 2 Byte
1 R/W 1 Byte
2 R/W 1 Byte
0 R/W 4 Byte
1 R/W 2 Byte
2 R/W 1 Byte
3 R/W 1 Byte
0 R/W 2 Byte
1 R/W 1 Byte
2 R/W 1 Byte
0 R/W 4 Byte
1 R/W 2 Byte
2 R/W 1 Byte
3 R/W 1 Byte
0 R/W 4 Byte
1 R/W 2 Byte
2 R/W 1 Byte
3 R/W 1 Byte
Data Type Data
Storage
Yes
ENUM
ENUM
Yes
ENUM 0x0038 (56) = ADSS1
ENUM 0x00 (0) = Normal
ENUM 0x02 (2) = Push-Pull
Yes
ENUM 0x01 (1) = Normal
ENUM
Yes
ENUM 0x003A (58) = LSSC1
ENUM 0x00 (0) = Normal
ENUM 0x02 (2) = Push-Pull
Yes
ENUM 0xFFF7 (65527) =
Transducer Signal
ENUM
ENUM 0x00 (0) = 4...20mA
english
Default
0x00 (0) IO-Link
0x01 (1) = Digital
Output
Operation
0x01 (1) = Digital
Output
0x00 (0) = Rising
89