About This Guide; Symbols And Conventions; Used Technical Terms And Abbreviations - Balluff BOS R254K-UUI-RE10-S4 Konfiguration

BOS R254K-UUI-RE10-S4
Photoelectric Sensors
1

About this Guide

1.1 Validity
This guide provides extensive information about the
IO-Link configuration of the following products:
– BOS R254K-UUI-RE10-S4
The configuration guide does not replace the user's guide.
Read the appropriate user's guide and the other applicable
documents completely before installing and operating the
product.
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2020, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the rights of reproduction, distribution,
processing and translation.
1.2

Symbols and Conventions

Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.3

Used Technical Terms and Abbreviations

CCM Comprehensive Condition Monitoring
CNT Counter
AdSS Adjustable Switching Sensor
IODD IO-Device-Description
ISDU IO-Link-Parameter (Index Service Data Unit)
LSB Least Significant Bit
LSSC Legacy Smart Sensor Channel
MSB Most Significant Bit
PD Process Data
RMS Root Mean Square
SSC Switching Signal Channel
SP Set point
TP Teachpoint
www.balluff.com english 5