Balluff BOS R254K-UUI-RE10-S4 Konfiguration Seite 159

BOS R254K-UUI-RE10-S4
Photoelectric Sensors
5
Secondary Device Functions (continued)
Switching Counter Input
With Switching Counter Input, the internal binary signal
source can be selected. Input contains a list of the internal
binary signals.
Value Meaning
0x0002 (2) Digital Input Pin 2
0x0003 (3) Switching Counter Limit not reached
0x0004 (4) Switching Counter Limit reached
0x0005 (5) Switching Counter Limit exceeded
0x0007 (7) Switching Counter Reset
0x0008 (8) Signal Delay Channel 1
0x0009 (9) Signal Delay Channel 2
0x000A (10) Signal Delay Channel 3
0x000B (11) Signal Delay Channel 4
0x0010 (16) Switching Speed ok
0x0011 (17) Switching Speed too low
0x0012 (18) Switching Speed too high
0x0014 (20) Switching Speed Reset
0x0015 (21) Short Circuit Pin 4
0x0016 (22) Short Circuit Pin 2
0x0017 (23) Undervoltage
0x0018 (24) Overvoltage
0x001A (26) Cable break pin 2
0x0021 (33) Signal Quality Bad
0x0023 (35) Humidity Bad
0x0027 (39) Transducer Enable
0x002E (46) Switching Threshold Adaption Alarm
0x002F (47) System Error
0x0034 (52) PDout Invalid
0x0037 (55) Inclination Alarm Status
0x0038 (56) ADSS1
0x003A (58) LSSC1
0x003B (59) LSSC2
0x003C (60) LSSC3
0x003D (61) LSSC4
0x003E (62) Teach In
0x0041 (65) Lifetime Extreme
0x004B (75) Vibration Alarm Status
0x0063 (99) LOGICBLOCK1_RESULT
0x0064 (100) LOGICBLOCK2_RESULT
0x0065 (101) LOGICBLOCK3_RESULT
0x0066 (102) LOGICBLOCK4_RESULT
Tab. 5-19: Switching Counter Input
www.balluff.com
Switching Counter Mode
With Switching Counter Mode, the current mode of the
counter function can be selected.
Value Meaning Description
0x00 (0) Deactivated Deactivated
0x01 (1) Static Static counter function
0x02 (2) Auto Auto counter function
Tab. 5-20: Switching Counter Mode
Switching Counter Limit
With Switching Counter Limit, the count limit for the
counter can be set. The value range is between 0x0002 (2)
and 0xFFFF (65535).
Switching Counter Startup Delay
With Switching Counter Startup Delay, the time for the
startup delay can be set. The startup delay begins after the
supply voltage is switched on. During the startup delay,
the counter has no function. The counter starts after the
startup delay has elapsed. The value represents the time in
seconds. The value range is between 0x00 (0) and 0xFF
(255). A value of 0x00 (0) represents no start delay.
Switching Counter State
With Switching Counter State, the current status can be
read.
Value Meaning Description
0x00 (0) Not reached Value is less than Limit.
0x01 (1) reached Value is greater than or equal to
Limit.
0x03 (3) exceeded Value is greater than Limit.
0x08 (8) Startup Startup delay currently running.
Delay
0xFF Deactivated Feature is deactivated.
(255)
Tab. 5-21: Switching Counter Status State
Switching Counter Value
With Switching Counter Value, the current counter value
can be read.
english 55