Technical Data; Description Of Functions - EINHELL CH4000 Bedienungsanleitung

GB

10. Technical data

Model designation
Model
Ignition
Power
Fuse
Fuel type
Fuel tank capacity
Fuel consumption (g/h)
Filament wattage (watts/KW)
Continuous operation
External dimensions of heater
Weight
Accessories
Safety features
Electricity consumption

11. Description of functions

No. Function
1 Timer
2 3 hour operation
3 ON display
4 Room temperature display
26
CH 4000 E
Comfort Heater
High-voltage ignition
Alternating current 230 V – 50 Hz
250 V – 5 amp / 250 V – 630 mA
(Use 2 fuses 2EA)
Petroleum
4.6 liters
183 - 317 g/h
2,200 – 3,800
14 – 26 hours
590 x 470 x 770 mm (Height, Depth, Width)
13.5 kg
Hand-held suction pump
Automatic cut-out, power failure fuse, overhea
cut-out, 3-hour cut out device, fuse for insuffici
combustion, automatic cut-out for excessively
high room temperature, over-voltage cut-out, fu
warning
Intensive combustion – 36 watts
Description
Preprogramming of the time or of the time when you
return home. If started with the timer the heater
switches itself off automatically after 1 hour of
operation. Before setting the timer you must first se
current time. The timer flickers once the button has
been pressed.
Used when 3 hour operation is required. Insert the
mains plug and press the button for 3 hour operatio
The display will show 3 hour operation. By pressing
3 hour button during operation, you can extend the
operation time by a further 3 hours
Press this button when you require continual operat
See operating instructions also.
If the air in the room is heavy then ventilation m
be necessary once or twice per hour.
This shows the room temperature. The display show
levels from 0 – 40° C. All levels below 0° C are show
by 00 and those above 40° C with 40.