HEIDELBERG Suprasetter A106 Installationsanleitung Seite 55

Fig. 38 Access to the load table
Fig. 39 Pull out load table
Fig. 40 Transport safeguard suck carriages
Suprasetter A106 – Installation
Unscrew both screws (Fig. 38/1) (size 4 wrench) of
the cable protection and remove the plate (Fig.
38/2).
Remove the locking screws (Fig. 39/1) on both
sides of the load table.
Press together the springs (Fig. 39/2) and pull out
the table.
Cut and remove the cable ties (Fig. 40/1) around
the suck carriages.
Push the load table back in and let it engage,
insert both locking screws (Fig. 39/1) again and fit
the cable protection (Fig. 38/2) again.
Installation
53