Service Switch - HEIDELBERG Suprasetter A106 Installationsanleitung

Safety
Risk of injury if safety system bypassed
The safety system must never be bridged because this could lead to eye and skin
injuries due to the invisible high power laser beam, bruising caused by the optics
or plate carriage or critical injuries caused by electric shocks.

Service Switch

Fig. 5 Service switch in the Suprasetter
The key can not be removed in the Service mode. For that reason, it is not possible to refit the side
panel as long as the device is in this mode.
Risk of injury from improper operation
Only ONE routine cycle may run at a time when you actuate the service switch. A
continuous test must not be carried out. A new procedure must be started sepa-
rately and manually.
Caution: Remote Control
If Remote Control is run when the key-operated switch is actuated, make sure to
follow the information about
16
WARNING
The service technicians switch the Suprasetter to
the Service mode with the service switch (Fig. 5/1)
for testing and maintenance work. This switch is
located on the right-hand side of the Suprasetter
and is accessible only after removing the side
panel.
The key for this service switch may only be
accessed by authorized service personnel. The
laser is not active in the Service mode; all other
Suprasetter functions are enabled.
WARNING
WARNING
"Heidelberg Remote Service", page 25.