Positioning The Seat; Adjusting The Rear-Shock Assemblies - Toro 2000 HDX RD Serie Bedienungsanleitung

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable
Figure 10
Adjusting the Rear-Shock
Assemblies
The MyRide™ suspension system adjusts to provide
(Figure 10).
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
The slots for the rear-shock assemblies have
detent positions for reference. You can position the
rear-shock assemblies anywhere in the slot, not just in
the detent positions. The following graphic shows the
position for a soft or firm ride and the different detent
positions
g027632
Note:
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies
19
(Figure 11).
Figure 11
1. Firmest position
2. Softest position
Ensure that the left and right rear-shock
g227753
3. Detents in the slots
(Figure 12).