Positioning The Seat; Adjusting The Myride® Suspension System; Adjusting The Motion-Control Levers; Adjusting The Height - Toro TimeCutter MX 4275T Bedienungsanleitung

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable
Adjusting the MyRide®
Suspension System
You can adjust the MyRide® suspension system for a
smooth and comfortable ride. The slots for adjusting
the suspension have detent positions for reference,
ranging from a soft to a firm ride
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Step off the machine.
4. While standing on the right side of the machine,
move the adjustment lever left toward the –
symbol for a softer suspension.
Move the adjustment lever right toward the +
symbol for a firmer suspension.
(Figure 8).
Figure 8
(Figure 9).
ARK
1. MyRide adjustment lever
2. Softer suspension
g027632
Adjusting the
Motion-Control Levers

Adjusting the Height

You can adjust the motion-control levers higher or
lower for maximum comfort
15
Figure 9
3. Firmer suspension
(Figure 10).
Figure 10
g292102
g333847