Depressurise The Hydraulic System (Pressure Relief); Multi-Function Switch; Travel Direction Selector Switch - Kärcher MC 130 Plus Bedienungsanleitung

Working mode indicators
The following indicators are shown on the display when switching
to Working mode (PTO).
Function buttons
1
Working mode displays
2
Setting buttons
3
The function and settings buttons have already been described
previously.
Working mode displays
The following indicators are shown on the display when switching
to Working mode (PTO).
Engine speed
1
Front attachment drive triggering level in %
2
Tortoise symbol (Fast mode indicator)
3
Snail symbol (Slow mode indicator)
4
Engine operating hours symbol
5
Operating hours counter
6
Working hours symbol (no function)
7
Working hours meter
8
Working speed
9
Mileage
10
Date and time
11
Travel direction backwards
12
Forwards direction of travel
13
Rear attachment drive triggering level in %
14
Preheating coil symbol
15
Engine coolant temperature
16
Battery charging monitor warning light
17
Engine oil pressure warning light
18
Parking brake warning light actuated
19
Hydraulic oil temperature
20
Fuel level indicator
21

Depressurise the hydraulic system (pressure relief)

The hydraulic system must be depressurised before disconnect-
ing the hydraulic hoses from the hydraulic connections.
74
1. Unplug the signal plug for attachment device detection (front).
2. Switch on the ignition (do not start the engine).
3. Switch on the PTO work hydraulics (at the arm rest control
panel).
4. Press the function key F 10 on the display.
5. Press function key F 6.
The rear hydraulic system is depressurised
6. Press function key F1.
The front hydraulic system is depressurised
7. Disconnect the hydraulic hoses.
8. Remove the attachment device.
Note
Attachment is performed in reverse sequence.
● Horns: Press the button on the end
● Flash to the right: Lever forwards
● Flash to the left: Lever backwards
● High beam: Press the lever down with the driving light
switched on
● Flasher: Pull lever and release
● Turn the ring: Turn on the windscreen wiper
Turn forward - interval
Turn backwards - 1. Continuous wipe level, keep turning for
2nd level
● Press the ring: Wiping with washer water

Travel direction selector switch

Select the travel direction using the travel direction selector
switch.
Travel direction selector switch
1
The following functions can be selected using the travel direction
selector switch, the selected programs are shown on the display.
● Neutral position
The travel direction selector switch is in the middle
● Forwards direction of travel
English

Multi-function switch