HEIDELBERG Suprasetter 106 Installation Seite 72

Installation
Fig. 60 Laser module with spring
Sensitive lens
Do not touch the lens!
Fig. 61 Eccentric
Risk of breakage
Do not use force; the pin could break!
70
Remove the cover of the PCB (Fig. 60/3).
Check that the PCB is not damaged.
Make sure that the spring (Fig. 60/1) enters the
hole (Fig. 60/2) when you are inserting the laser
module.
NOTICE
Take eccentric (Fig. 61/1) from the package, mount
it on special-purpose tool BV.011.9825 and screw
tight.
NOTICE