Charger; Charger And Handpiece; Transport And Storage Conditions; Installation Of The Unit Factory Settings - 3M Elipar DeepCure-L Betriebsanleitung

SEITE 4 - 148 x 210 mm - 3100021788/01 - SCHWARZ - 20-052 (kn)
Charger Model GTM96060-0606-1.0
Operating voltage: 100-240 V 50/60 Hz
Nominal consumption: 0.6 A max
Dimensions without
country-specific adapter: Length: 74 mm
Width: 44 mm
Depth: 37 mm
Weight: 107 g
Classification: Protection class II,
Manufacturer: GlobTek, Inc.
Model: GTM96060-0606-1.0
Handpiece
Power supply: Lithium-ion battery,
nominal voltage 3.7 V,
capacity 2300 mAh
Utilizable wavelength
range: 430-480 nm
Wavelength peak: 444-452 nm
Light intensity (between
400 and 515 nm): 1470 mW/cm
(independent of battery power
level)
Light emission area: 60-65 mm
Intermittent operation: The device has been designed
solely for short-term operation.
Typical operating time at room
temperature (23 °C): 7 min,
at 40 °C ambient temperature:
1 min on, 15 min off (cooling-off
period)
Total exposure time
with new, fully
charged battery: Typically 120 min
Dimensions: Diameter: 28 mm
Length:
Weight: 180 g (incl. light guide)
Typ B

Charger and Handpiece

Time to charge
empty battery: Approx. 2 h
Operating temperature: 10 °C up to 40 °C /
59 °F up to 104 °F
Relative humidity: 30% up to 75%
Atmospheric pressure: 700 hPa up to 1060 hPa
4

Transport and Storage Conditions:

Ambient temperature range: -20 °C up to +40 °C /
Relative humidity:
Atmospheric pressure:
Subject to technical modification without prior notice.
2 -10%/+20%
Installation of the Unit
2 (optically active)
Factory Settings
The factory settings of the device are as follows:
• 10 sec exposure time

Initial Steps

Charger

Charger Model CPS008050100
270 mm
-4 °F up to +104 °F
–20°C
30% up to 75%
30%
700 hPa up to 1060 hPa
700
Select the plug adapter specific to the country and
place it on the charger.
Plug adapter
+40°C
+104°F
–4°F
75%
max.
1060
hPa