Wheelchair Folding/Unfolding/ Carrying; Adjustment; Reinstallment; Life Span - Meyra 2.750 Bedienungsanleitung

You must not let yourself be carried in your
wheelchair by having the wheelchair lifted
from the floor.Parts that are not securely fixed,
e.g. side elements or leg supports, can come
away and thus cause an accident.
☞ The wheelchair is a vehicle and not a car-
rying device.
Only apply the wheelchair within the scope of
the specifications and limitation described in
chapter Technical data.
WHEELCHAIR FOLDING/
UNFOLDING/CARRYING
You wheelchair can be folded without the aid
of tools.
1. Remove the seat cushion, if applicable.
2. Lift up the footplates or remove the leg
supports.
3. Pull the seat belt upward in the centre of
the front and back.
Your wheelchair can be carried without difficul-
ty when folded.
For this, push one lower arm from the front
under the upward folded seat belt. Place other
hand underneath the rear seat fold for support.
Lift the wheelchair to horizontal position.
Tip the wheelchair slightly to one side in order
to make the unfolding easier. At the side resting
on the floor, press the seat tube down to the
end stop.
☞ You may need to press down both seat
tubes with the hands in order to do this.
☞ Ensure that the seat tube sits securely on
the support surface.

ADJUSTMENT

Always have adaptation and adjustment
work carried out by a specialist dealer.
The wheelchair offers manifold adjustment
possibilities to individual vital statistics. The
wheelchair should be adapted to your needs
by a specialist dealer before the first use. The
adaptation will take into account the driving
experience, the physical limits of the user and
the main place of use of the wheelchair.
☞ We recommend a regular control if the
wheelchair adjustment in order to ensure
a long-term optimal provision even with
changing illness/handicap patterns of the
user.

REINSTALLMENT

The wheelchair is suited for reinstallment. With
the building block system the wheelchair
can be fit to accommodate different handi-
caps body sizes. Before reimplementation the
wheelchair is to undergo a complete inspec-
tion.
☞ Hygienical measures required for reinstall-
ment are to be carried out according to a
validated hygienic plan and must include
disinfection.

LIFE SPAN

We expect an average life span of about 4 years
for this product, as far as the product is applied
for its designated purpose and all maintenance
and service guidelines. The life span of your
product depends upon the frequency of use,
the application environment and care. The im-
plementation of spare parts can prolong the
life span of the product. As a rule spare parts
are available up to 5 years after production is
discontinued.
☞ The indicated lifespan does not constitute
additional guarantee.

BRAKE

Arrange an immediate repair of the brakes by
your specialist workshop if the braking per-
formance reduces.
Wheelchairs with PU-tyres should be stored
safely without activated pressure brakes in
case of longer standing periods.
23