TR-Electronic CD 582-Serie Handbuch Seite 121

As long as Watch_table_1 is the active application in the editor work area, you

can select the Monitor all command in the menu bar under Online or the
corresponding icon in the editor toolbar, in order to establish a connection to the
F-CPU.
 If the device status LED in the measuring system flashes with "3 x 5 Hz
repeating", then the tag ˮTag_1ˮ must be set to TRUE in the monitoring window.
This is done by selecting the relevant field with the right mouse button for the tag
ˮTag_1ˮ in the Modify value column. This opens a shortcut menu. In the menu
select the entry Modify -> Modify to 1 with the left mouse button.
Printed in the Federal Republic of Germany
12/17/2020 TR - ECE - TI - DGB - 0340 - 01
 TR-Electronic GmbH 2019, All Rights Reserved
Page 121 of 144