Attribute 105, Tr-Parameter In Use (Scaling); Attribute 106, Temperature Value - TR-Electronic C 58 Serie Benutzerhandbuch

7.4.3.31 Attribute 105, TR-Parameter in use (scaling)

TR-Parameter in use sets which scaling attributes are in use.
BOOL
Access
Set / Get
Standard EthernNet/IP scaling parameters:
-
-
Manufacturer specific TR scaling parameters:
-
-
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
This attribute only takes effect after executing service code 0x16 save or attribute 112
Accept Parameter.

7.4.3.32 Attribute 106, Temperature Value

Temperature Value contains the actual temperature of the measuring system.
The unit is defined in "Attribute 107, Temperature Value Format" it is standardly °C.
INT, read only
2
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
Printed in the Federal Republic of Germany
01/17/2019
Value Description
= 0 Standard EthernNet/IP scaling attributes in use
= 1 Manufacturer specific TR scaling attributes in use
Attribute 16, Measuring Units per Span
Attribute 17, Total Measuring Range in Measuring Units
Attribute 101, Total Measuring Range
Attribute 102/103, Revolution Numerator/Denominator
0x23
Logical Type
Class #23
Temperature
Byte 0 Byte 1
7 0 15
up to 2 2
0x23
Logical Type
Class #23
TR - ECE - BA - DGB - 0102 - 09
0x24 0x01
Instance #1
= Instance
8
up to 2
0x24 0x01
Instance #1
= Instance
Default
X
0x30 0x69
Logical Type
Attr.-ID #105
=Attr.-ID
0x30 0x6A
Logical Type
Attr.-ID #106
=Attr.-ID
 TR-Electronic GmbH 2013, All Rights Reserved
Page 147 of 175