X
X
Turn the two black blocks (with the word
CLEAN, at the bottom of the door) for 180°
so that they fit into the seats in the oven
structure.
–
Make sure to turn the black blocks
completely.
The blocks click into their position.
CAUTION! Damage to the oven due to wrong
handling!
If the blocks are not turned completely,
removing the glass panel will cause the oven
door to close immediately.
Z
X
Never try closing the door when one or both
blocks have partially or completely freed the
glass panel.
X
X
Carefully push the internal glass panel (1)
towards the oven. Then lift the internal
glass panel (2).
The two black
blocks will
prevent the
door from
closing.
X
X
Clean the internal glass panel.
MA 82 M _/F / MA 86 M _/F
Removing and cleaning the intermediate
glass panel of the oven door
After removing the internal glass panel, the
intermediate glass panel can be removed.
X
X
Removing and cleaning the upper trims
for glass panels
For more thorough cleaning, the upper trims
on the oven door can be removed. The upper
trims are fixed with two screws, one in the
upper right, one in the upper left corner on the
inside of the oven door. It is only possible, to
remove the upper trims when the internal glass
is removed.
X
X
X
Mounting the glass panels
The correct position of the mounted glass
panels is indicated by the wording TEMPERED
GLASS which must be perfectly legible.
X
X
X
X
X
Cleaning the side frames
2
To clean the side frames thoroughly they can
be removed from the oven.
1
– 17 –
X
Carefully lift the intermediate glass panel
out of the rubbers on both sides.
X
Clean the intermediate glass panel.
X
Unscrew the fixing screws in the upper right
and left corner of the oven door.
X
Remove the upper trim.
X
Clean the upper trim.
X
If unmounted, put the upper glass trim back
in place.
X
If unmounted, put the intermediate glass
panel back in place within the rubbers.
X
Put the internal glass panel back in place.
X
Turn the two glass retaining blocks back to
their original position.
X
Close the oven door.
EN