Before first Use
Remove the angle grinder and the accessories for the packaging.
Keep packaging material out of reach of children. There is risk of
suffocation!
Intended Use
This angle grinder is intended for cutting and grinding metal and
stone with the suitable discs.
Charging the Battery
1. The rechargeable battery (10) must be charged before the first
use. Only recharge the battery once it is has been fully dis-
charged, i.e. the power clearly decreases. Otherwise the bat-
tery may not achieve its full capacity. Important! Only use the
provided charging station to charge the battery.
2. Connect the charging station with power
mains. The green power indicator LED
(b) turns on and indicates that power is
on.
3. Insert the battery into the charging
station as shown in the right picture.
The red power indicator LED (a) starts
flashing to indicate that the battery is
charged.
4. While charging, the battery and the
charging station become lightly warm.
After charging process the red power
indicator (a) turns on show that the bat-
tery is fully charged. Charging process
takes approx. 1 hour. Remove the bat-
tery from the charging station and un-
plug from power mains.
Operation
36
a b