Using The Safety Hood For Cutting Discs - Westfalia 85 26 02 Bedienungsanleitung

 The maximum permitted speed of the disc must be equal to or
higher than the maximum no load speed of the machine. The
maximum permitted speed of the cutting disc is printed on the
disc.
 Use only cutting or grinding discs with a maximum permitted
rotation speed of 11000 rounds per minute.
 Never cut materials containing asbestos with this angle grider.

Using the safety hood for Cutting Discs

 When using the angle grinder with cutting disc, always
use the safety hood for cutting discs.
 Observe the rotating direction
when attaching the cutting
disc. You will find the rotating
direction arrow on the cutting
disc.
 Wear protective clothing such
as goggles, gloves, sturdy
shoes and ear protection.
 Never stress cutting discs
laterally. There is risk of
breaking or splintering.
 Please note that after work the cutting disc and the workpiece
become very hot. There is risk of burns! Make sure to use
always the right cutting disc for the job.
1. Securely attach the safety hood for cutting disc on the angle
grinder.
2. Secure the workpiece and place suitable wedges under the
workpiece. When operating the angle grinder, do not press
the cutting disc too much on the workpiece. The self weight of
the angle grinder is enough to perform the cut. Avoid over-
Operation
40