Tips For Using; Air Pressure And Air Volume; Maintenance And Care - Westfalia 55 58 13 Bedienungsanleitung

Air Pressure and Air Volume

Operate the pneumatic mini die grinder with a pressure of
6.3 bar (90 psi) using a compressor with an air suction capacity
of at least 200 l/min. The ideal capacity is provided by
compressors with a suction capacity of 300 - 400 l/min.
Only use air hoses with an inner diameter of at least 9 mm.
When setting up the air pressure, always keep in mind that the
pressure will decrease by approx. 0.6 bar when using a 10 m
long hose with an inner diameter of 9 mm.

Maintenance and Care

To ensure proper functionality and a long lifetime, diligent
lubrication and maintenance is essential.
For operating pneumatic tools clean air is required. Corrosion
residues, dust and dirt from the pneumatic pipes reduce the
efficiency of the tool and will cause technical problems. An
upstream maintenance unit consisting of filter, pressure regulator
valve and lubricating equipment removes moisture and dirt from
the air, controls the working pressure and supplies the tool
perfectly with lubricating oil.
If necessary clean the unit with a moist cloth.
Do not use abrasive or aggressive chemicals as benzene or
thinner, which may dissolve plastic parts.
Do not allow liquids to enter the unit and never immerse it into
liquids. Water in the compressed air inlet can damage the
machine. Therefore it is recommended to drain the air lines and
the compressor regularly! Also clean the air filters on a regular
basis.
Operation
13